StiMBERTM is a unique, concept utilising the combined strengths of steel and timber bound together with application in construction formwork. StiMBERTM is a natural choice for those looking at a holistic solution that encompasses the benefits of 10x repetitions alongside strength & ease of handling like none other.
The strength of steel and the workability of wood
StiMBERTM is a unique, concept utilising the combined strengths of steel and timber bound together with application in construction formwork. Stimber is a natural choice for those looking at a holistic solution that encompasses the benefits of 10x repetitions alongside strength & ease of handling like none other.
More Sustainable
compared to
substitutes
Higher repetitions
result in lower cost
per usage
Galvanised hence
corrosion resistant
& greater strength
Designed for
Higher Safety
on work sites
Light weight,
easy to install by
nailing to panels
*Slab as secondary & primary members
VARIANTS
J70 – 4kgs / metre
J50 – 3kgs / metre
Sizes (m): 1.2, 2.4, 3, 3.6
APPLICATIONS
Beam, Beam Bottom, Column,
Retaining Wall, Slab Primary & Secondary Member.
Not just a claim, but a proven application
The test specimens are composite sections consisting of a timber log encased in a galvanized section of steel. The timber section is connected to the steel section with nails at regular intervals.
The test specimens are composite sections consisting of a timber log encased in a galvanized
section of steel. The timber section is connected to the steel section with nails at regular intervals.
TEST RESULTS FOR J-70 BEAM
| Bending Test | ||
| Failure Load | Ultimate moment capacity (kNm) | EI (kN-m2) |
| 8.96 | 4.03 | 60.5 |
| 7.94 | 3.57 | 61.3 |
| Average | 3.80 | |
| Shear Test |
| Failure Load |
| 16.23 |
| Ultimate shear strength (kN) |
| 8.11 |
TESTED & VERIFIED BY
BUREAU VERITAS, BANGALORE
IIT CHENNAI
THE KING OF
REPETITIONS
IN FORMWORK
Upto
300
Repetitions
COMPARED REPETITIONS
H-beam : 30
Pine : 3
Silver Wood : 3
